NHK Teleflex Corporation
To Home
Products information
Corpolate outline
Network
V-series contura switch
V-series contura sealed rocker switches
Whatever your application, our Contura switches deliver the performance you demand — and the flexibility you need. There’s no challenge these sealed switches can’t help you address. Especially since they’re IP66/IP68 certified, UL1500 recognized, and able to withstand temperatures from -40°C to +85°C. Never have such rugged switches been available in such attractive packages. Adazzling array of light, lens and legend options on several actuator styles, plus countless circuit combinations, and valuable accessories, make our Contura switches the ideal choice.
Maximum Design Options with minimum inventories
Panel redesign is a snap, requiring no tooling change, with our removable interchangeable actuators. A unique balance between aesthetics and functionality.
Seals out water, dust and debri
Dual seal protection locks out elements. Certified to IP66/IP68.
Clean Connections
Offered in both eight and ten terminal base options.AMP & Packard compatible connectors available.
Optional Panel Seal
Prevents water/dust egress behind panel.
Multiple Lighting Options
Incandescent lamps & LED illumination. Our LED illumination is offered in a wide array of light intensities, colors, as well as dual level illumination and flashing options.
Withstands Extreme Temperatures
Roller pin mechanism eliminates need for lubricants, so it can withstand from 40℃ to +85℃.

page top
V-series contura switch
V-Series switches offer countless unique options including choices for ratings, colors, illuminations and symbols. These switches feature removable actuators in a choice of actuator styles and colors, and are available in single or double pole configurations. The V-Series switches can be illuminated with either square, oval and/or bar shaped lenses.
Contura II
Contura II
The Contura II actuators are constructed of thermoplastic polycarbonate, and are offeredwith either a hard nylon overlay, or a “soft-touch” elastomer overlay. The Contura II incor-porates an aesthetic design of two rows of raised “bumps” on the top and bottom of the rocker.
Contura III
Contura III
The Contura III actuators are constructed of thermoplastic polycarbonate, and are offered with either a hard nylon over lay, or a “soft-touch” elastomer overlay. The Contura III incorporates three rows of bars on the top and bottom of the rocker.
Contura IV
Contura IV
The Contura IV’s “Shape to create a Shape” actuator suports the designer, by working with the curves, contours and advanced styling of the latest panel designs, flowing with these advanced curves and radii. This actuator style fits on the Contura II & III flush bracket/bezel.
Contura V
Contura V
The symmetrically curved Contura V actuator provides the perfect complement to the Contura IV’s “Shape to create a Shape”design concept. It can be mounted in between two Contura IV’s, by itself, or in groups. This actuator style is available with all flush style mounting brackets.
Contura X
Contura X
The raised bracket/bezel on the Contura X helps prevent inadvertent actuation of the rocker, as well as preventing debris from being trapped under the actuator. The conventionally designed actuators are available with one-piece bar lenses, or square lenses in either one or two part construction with backlit legends, for increased durability of lens symbols.
Contura XI
Contura XI
The raised bracket/bezel on the Contura XI helps prevent inadvertent actuation of the rocker, as well as preventing debris from being trapped under the actuator. The actuators are available with onepiece bar lenses, or square lenses in either one or two part construction with backlit legends, for increased durability of lens symbols.
Contura XII
Contura XII
The Contura XII version incorporates a paddle style handle on the raised bracket/bezel, also used in the Contura X and XI switch. The contoured handle design provides intuitive recognition and ease of operation for a variety of transportation related applications, and is available with all Contura X and XI lens and legend offerings.
Illuminated Plug
Illuminated plug
The Illuminated Plug is offered with removable/ replaceable lamps, Contura II, V and X styling, and LED illumination. As a critical safety feature, it’s illumination alerts the operator of essential system functions or malfunctions like: oil pressure, high temperature, transmission or other fluid levels, parking brake, or general system malfunction.
page top
V-Series Accessories/Options
Carling Technologies also offers many V-Series accessories including connectors, mounting panels, hole plugs, panel seals, and actuator removal tools.
page top
General specifications
Electrical
Contact Rating .4VA@ 24VDC (MAX) resistive 15 amps, 125 VAC
10 amps, 250 VAC
1/2 HP125-250 VAC
20 amps, 4-14 VDC
15 amps, 15-28 VDC
10A14VT
6A125 VAC L
Dielectric Strength 1500 Volts RMS
Insulation Resistance 50 Megohms
Initial Contact Resistance 10milliohms max. @4VDC
Initial Contact Resistance Life
50,000- 100,000 cycles circuit dependent
Contacts
Silver cad-oxide, silver tin-oxide, fine silver
Terminals
Brass or copper/silver plate 1/4”(6.3mm) Quick Connect terminations standard. Solder lug, Wire Lead
Mechanical
Endurance 150,000 cycles minimum
Physical
Lighted Incandescent - rated 10,000 hours
Neon - rated 25,000 hours
LED - rated 100,000 hours 1/2 life (LED is internally ballasted for voltages to 24 VDC)
Seals
Internal
Optional external gasket panel seal
Base
Polyester blend rated to 125C with a Random ULflammability rating of 94 V-O.
Contura II , III , IV , V
Actuator Hard Surface: Basic actuator structure molded of thermoplastic polycarbonate with a hard Nylon 66 thermoplastic surface overlay.
Soft Surface: Basic actuator structure molded of thermoplastic polycarbonate with an elastomer overlay.
Contura X , XI , XII
Actuator, VP Nylon 66 Reinforced rated to 105℃
Lens Polycarbonate rated at 100℃
Actuator Travel (Angular Displacement)
2 position 18℃
3 positions 9℃ from center
Mounting Specifications
Panel Thickness Range
# of gaskets Acceptable Panel Thickness
0 .030 to .250 (.76mm to 4.76mm)
1 .030 to .109 & .147 to .157
(.76 to 2.77mm & 3.73 to 3.98mm)
Recommended: No gasket with panel thickness of .032, .062, .093, .125,.187 or .250
Agency Certifications
marks
Environmental
Environmental
Sealed version: IP68, in accordance with IEC 529, BS 5490, DIN 400 50 & NFC 20 010. This rating applies to front panel components and signifies protection against dust and the prolonged effects of immersion under pressure. The standard test for mmersion under pressure requires submersion under one meter of water for 30 minutes. The V-Series switch has exceeded these parameters, having been actuated and illuminated during submersion.
NOTE: Sealed switch with optionalpanel gasket will meet IP67 rating.
Corrosion Flowing Mixed Gas (FMG)
Class III 3 year accelerated exposure per ASTM B-827, B-845
Silver and gold contacts
Physical Operating Temperature -40℃ to + 85℃
Vibration 1 Per Mil-Std 202F, Method 204D Test Condition A0.06 DAor 10G’s 10-500 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test and pre and post test contact resistance.
Vibration 2 Resonance search
24-50 Hz 0.40 DA
50-2000 ±10 G’s peak
Results Horizontal Axis 3-5 G’s max.
  Random  
  24 Hz
60 Hz
100Hz
200Hz
2000Hz
0.06PSD-Gsq/Hz
0.50
0.05
0.025
0.025
 
No loss of circuit during test; <10μ seconds chatter.
Shock
Per Mil-Std 202F, Method 213B, Test Condition K @ 30G’s. Tested with VCH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance.
Salt Spray Per Mil-Std 202F, Method 101D, Test Condition A, 48 Hrs. Sealed version only.
Dust Per Mil-Std 810C, Method 510.2 Air Velocity 300 ±200 Feet/Min, Test Duration 16 Hrs.
Thermal Shock
Per Mil-Std 202F, Method 107F, Test Condition A, -55℃ to 85℃. Test criteria - pre and post test contact resistance
Moisture Resistance Per Mil-Std 202F, Method 106F, Test Criteria - pre and post test contact resistance
Ignition Protection All Contura switches with sealed construction meet the requirements of UL1500/ISO8846 for ignition protection, in addition to conformance with EC directive 94/25/EC for marine products.
page top
 
3-21-10, Shin-yokohama,
Kohoku-ku, Yokohama,
222-0033 JAPAN
To Japanese page